• Based on 8085 CPU operating at 6.144 MHz. crystal.
• 8/32K bytes of RAM and space for further expansion.
• 128KB RAM (optional).
• 16K bytes of EPROM loaded with powerful monitor program, space for further expansion..
• 3 nos. of 16 bit programmable timer/counter using 8253.
• 48 I/O lines using two nos. of 8255. PPI.
• 8 different level interrupts through 8259.
• Six seven segment display.
• 28 keys hexadecimal keyboard.
• IBM PC compatible Keyboard.
• Using 6845 CRT Controller along with character generator & Video RAM.
• All data, address and control signals (TTL compatible) available at 50 pin FRC connector.
• 14" Monochrome Monitor (optional).
• EPROM Programmer for 27 series EPROMs.
• Printer Interface.
• Battery Backup for RAM.
• RS-232C interface for CRT using SID/SOD lines.
• Interrupt Controller using 8259.
• 8 channel 8 bit ADC using 8259.
• 1 channel 8 bit D/A using DAC 0800.
• Real Time Clock.
• Three modes of Commands:
  • Hex Key pad Mode
  • Serial Mode
  • CRT & ASCII Keyboard Mode.
• On-board Single Line Assemble/Disassembler.
• Facility for Downloading/Uploading files from/to PC.
• Power Supply requirements: 5V/2.5A, +/-12V/250mA, +24V/21V/100mA
• User's Manual.

POWER SUPPLY - PS- IV (OPTIONAL)

ORDERING GUIDE

• Based on 8085 CPU operating at 6.144 MHz. crystal.
• 16K bytes of EPROM with powerful monitor program.
• 8K byte of RAM available to the user.
• Total on board memory expansion upto 64K bytes using 2732/2764/27128.
• 20x2 Liquid Crystal Display (LCD) with backlight.
• 48 programmable I/O lines provided through two nos. of 8255.
• 16 bit programmable timer/counter using 8253.
• Additional serial port using 8251
• Printer Interface.
• EPROM Programmer for 27 series EPROM.
• Battery backup for user's RAM with 3.6V rechargeable cell.
• RS-232C interface for CRT using SID/SOD lines.
• Interrupt Controller using 8259.
• 8 channel 8 bit ADC using 0809.
• 1 channel 8 bit DAC using 0800.
• 1 Opto isolated input & 1 Relay Output.
• Real Time Clock (optional).
• 2 Modes of Commands:
  • Key board Mode
  • Serial Mode
• All addresses, data and control lines are buffered and made available at 50 pin FRC connector as per STD Bus configuration.
• Powerful Software Commands like Examine/Modify memory. Examine Register, Relocate, String, Fill, Insert, Delete, Block move, Memory Compare etc.
• On-board Single Line Assemble/Disassembler.
• 104 keys IBM PC compatible keyboard for programing, editing, debugging, execution etc.
• Facility for Downloading/Uploading files from/to PC.
• Power Supply requirements: 5V/1.5A, +/-12V/250mA, +24V/21V/100mA
• User's Manual.

POWER SUPPLY - PS- III (OPTIONAL)

ORDERING GUIDE