• Based on 8085 Microprocessor operating at 6.144 MHz clock frequency
• VMC-ICE8085 comprises three components:
  • Microprocessor Kit
  • In-circuit Emulator
  • Cross Assembler
• 48K Emulation Memory, RAM area starting from0000H
• 8K bytes of EPROM with powerful monitor program.
• 48 I/O lines using 2 nos. of 8255.
• Three nos. of 16 bit Timer/Counter using 8253.
• 28 keys Hexadecimal keyboard & 6 Seven Segment display.
• On board battery backup for Emulation memory.
• 40 Pin Header with cable for connecting the target.
• RS-232C port for serial communication with PC.
• Uploading/Downloading facility to/from PC.
• Powerful software commands like Break point, Single Stepping, Auto Single Stepping, Go, Fill, Compare, Examine Memory, Assemble etc.
• User's Manual, cable & connectors.
• Power Supply requirements: +5V/1.2A, +/-12V/250mA, +24V/100mA.

ON BOARD ICE8085 CROSS ASSEMBLER:

VMC-ICE8085 has its own fast & efficient built-in Cross Assembler that can assemble a source file and produce a modified Hex file which can be downloaded to VMC-ICE8085.
The 40 pin POD and flat cable are use to connect the VMC-ICE8085 to the taget system.The Input/Output Structure provides 48 I/O lines using 8255. It has got 16 bit programmable Timer/Counter for generation of accuate time delay under software control.

Advantage of using VMC-ICE8085 kit over normal 8085 Microprocessor Training kit:5V/2.5A, +/-

Ram area from 0000H location onwards, so all software & Hardware interrupts can be taught as per 8085 Instructions.

Target program development & debugging starts from 0000H location and when development is over, can be directly loaded in the EPROM.

The VMC-ICE8085 kit can be directly connected to the CPU of the target board to test software & Hardware by wriing small programs for enabling students/users to understand the techniques of hardware and software testing.

POWER SUPPLY - PS- III (OPTIONAL)

ORDERING GUIDE

• Based on 8085 Microprocessor operating at 6.144 MHz clock frequency
• VMC-ICE8085 comprises three components:
  • Microprocessor Kit
  • In-circuit Emulator
  • Cross Assembler
• 48K Emulation Memory, RAM area starting from0000H
• 8K bytes of EPROM with powerful monitor program.
• 48 I/O lines using 2 nos. of 8255.
• Three nos. of 16 bit Timer/Counter using 8253.
• 28 keys Hexadecimal keyboard & 6 Seven Segment display.
• On board battery backup for Emulation memory.
• 40 Pin Header with cable for connecting the target.
• Programmer for 27 series EPROMs with facility to blank Check, Verify, Program & Read can be operated in Both serial & stand alone mode.
• RS-232C port for serial communication with PC.
• Uploading/Downloading facility to/from PC.
• Powerful software commands like Break point, Single Stepping, Auto Single Stepping, Go, Fill, Compare, Examine Memory, Assemble etc.
• User's Manual, cable & connectors.
• Power Supply requirements: +5V/1.2A, +/-12V/250mA, +24V/100mA.

ON BOARD ICE8085 CROSS ASSEMBLER:

VMC-ICE8085 has its own fast & efficient built-in Cross Assembler that can assemble a source file and produce a modified Hex file which can be downloaded to VMC-ICE8085.
The 40 pin POD and flat cable are use to connect the VMC-ICE8085 to the taget system.The Input/Output Structure provides 48 I/O lines using 8255. It has got 16 bit programmable Timer/Counter for generation of accuate time delay under software control.

Advantage of using VMC-ICE8085 kit over normal 8085 Microprocessor Training kit:5V/2.5A, +/-

Ram area from 0000H location onwards, so all software & Hardware interrupts can be taught as per 8085 Instructions.

Target program development & debugging starts from 0000H location and when development is over, can be directly loaded in the EPROM.

The VMC-ICE8085 kit can be directly connected to the CPU of the target board to test software & Hardware by wriing small programs for enabling students/users to understand the techniques of hardware and software testing.

POWER SUPPLY - PS- III (OPTIONAL)

ORDERING GUIDE